Alcohol inks and Gel Press

 

I’ve seen a lot of this about lately so thought I’d give it a go. I’ve kept it fairly simple as a process. Lay the stencil (this is a new one from Melina coming out next week) on the Gel Press, sprinkle the inks over the top and then use a brayer to roll them out. 

I then removed the stencil and brayered a light layer of white paint over the top and pulled the print.

Look at those colours! You'll get a different result each time.

 Not wanting to waste the inks I then spritzed the stencil with blending fluid and pulled another print.

I’ve made mine into some ATCs and stencilled on a bit of gold Glaze. Add some lightbulbs from the acetate I used a couple of weeks ago to finish off.

Hope you've enjoyed this project!

Helen

All products from That's Crafty!

https://www.thatscrafty.co.uk/kielty-alcohol-inks.html

https://www.thatscrafty.co.uk/kielty-alcohol-ink-blending-solution.html

https://www.thatscrafty.co.uk/112121.html

https://www.thatscrafty.co.uk/13-arts-transparent-foil-acetate-mr-handsome.html

https://www.thatscrafty.co.uk/gel-printing-plates-tools.html